/* $NetBSD: aacreg.h,v 1.15 2024/02/02 22:19:13 andvar Exp $ */ /*- * Copyright (c) 2002, 2007 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Andrew Doran. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 2000 Michael Smith * Copyright (c) 2000-2001 Scott Long * Copyright (c) 2000 BSDi * Copyright (c) 2000 Niklas Hallqvist * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from FreeBSD: aacreg.h,v 1.1 2000/09/13 03:20:34 msmith Exp * via OpenBSD: aacreg.h,v 1.3 2001/06/12 15:40:29 niklas Exp * incorporating some of: aacreg.h,v 1.23 2005/10/14 16:22:45 scottl Exp */ /* * Data structures defining the interface between the driver and the Adaptec * 'FSA' adapters. Note that many field names and comments here are taken * verbatim from the Adaptec driver source in order to make comparing the * two slightly easier. */ #ifndef _PCI_AACREG_H_ #define _PCI_AACREG_H_ /* * Misc. magic numbers. */ #define AAC_MAX_CONTAINERS 64 #define AAC_BLOCK_SIZE 512 /* * Communications interface. * * Where datastructure layouts are closely parallel to the Adaptec sample code, * retain their naming conventions (for now) to aid in cross-referencing. */ /* * We establish 4 command queues and matching response queues. Queues must * be 16-byte aligned, and are sized as follows: */ #define AAC_HOST_NORM_CMD_ENTRIES 8 /* cmd adapter->host, normal pri */ #define AAC_HOST_HIGH_CMD_ENTRIES 4 /* cmd adapter->host, high pri */ #define AAC_ADAP_NORM_CMD_ENTRIES 512 /* cmd host->adapter, normal pri */ #define AAC_ADAP_HIGH_CMD_ENTRIES 4 /* cmd host->adapter, high pri */ #define AAC_HOST_NORM_RESP_ENTRIES 512 /* resp, adapter->host, normal pri */ #define AAC_HOST_HIGH_RESP_ENTRIES 4 /* resp, adapter->host, high pri */ #define AAC_ADAP_NORM_RESP_ENTRIES 8 /* resp, host->adapter, normal pri */ #define AAC_ADAP_HIGH_RESP_ENTRIES 4 /* resp, host->adapter, high pri */ #define AAC_TOTALQ_LENGTH \ (AAC_HOST_HIGH_CMD_ENTRIES + AAC_HOST_NORM_CMD_ENTRIES + \ AAC_ADAP_HIGH_CMD_ENTRIES + AAC_ADAP_NORM_CMD_ENTRIES + \ AAC_HOST_HIGH_RESP_ENTRIES + AAC_HOST_NORM_RESP_ENTRIES + \ AAC_ADAP_HIGH_RESP_ENTRIES + AAC_ADAP_NORM_RESP_ENTRIES) #define AAC_QUEUE_COUNT 8 #define AAC_QUEUE_ALIGN 16 struct aac_queue_entry { u_int32_t aq_fib_size; /* FIB size in bytes */ u_int32_t aq_fib_addr; /* receiver-space address of the FIB */ } __packed; #define AAC_PRODUCER_INDEX 0 #define AAC_CONSUMER_INDEX 1 /* * Table of queue indices and queues used to communicate with the * controller. This structure must be aligned to AAC_QUEUE_ALIGN */ struct aac_queue_table { /* queue consumer/producer indexes (layout mandated by adapter) */ u_int32_t qt_qindex[AAC_QUEUE_COUNT][2]; /* queue entry structures (layout mandated by adapter) */ struct aac_queue_entry qt_HostNormCmdQueue[AAC_HOST_NORM_CMD_ENTRIES]; struct aac_queue_entry qt_HostHighCmdQueue[AAC_HOST_HIGH_CMD_ENTRIES]; struct aac_queue_entry qt_AdapNormCmdQueue[AAC_ADAP_NORM_CMD_ENTRIES]; struct aac_queue_entry qt_AdapHighCmdQueue[AAC_ADAP_HIGH_CMD_ENTRIES]; struct aac_queue_entry qt_HostNormRespQueue[AAC_HOST_NORM_RESP_ENTRIES]; struct aac_queue_entry qt_HostHighRespQueue[AAC_HOST_HIGH_RESP_ENTRIES]; struct aac_queue_entry qt_AdapNormRespQueue[AAC_ADAP_NORM_RESP_ENTRIES]; struct aac_queue_entry qt_AdapHighRespQueue[AAC_ADAP_HIGH_RESP_ENTRIES]; } __packed; /* * Adapter Init Structure: this is passed to the adapter with the * AAC_MONKER_INITSTRUCT command to point it at our control structures. */ struct aac_adapter_init { u_int32_t InitStructRevision; u_int32_t MiniPortRevision; u_int32_t FilesystemRevision; u_int32_t CommHeaderAddress; u_int32_t FastIoCommAreaAddress; u_int32_t AdapterFibsPhysicalAddress; u_int32_t AdapterFibsVirtualAddress; u_int32_t AdapterFibsSize; u_int32_t AdapterFibAlign; u_int32_t PrintfBufferAddress; u_int32_t PrintfBufferSize; u_int32_t HostPhysMemPages; u_int32_t HostElapsedSeconds; /* ADAPTER_INIT_STRUCT_REVISION_4 begins here */ u_int32_t InitFlags; /* flags for supported features */ u_int32_t MaxIoCommands; /* max outstanding commands */ u_int32_t MaxIoSize; /* largest I/O command */ u_int32_t MaxFibSize; /* largest FIB to adapter */ } __packed; #define AAC_INIT_STRUCT_REVISION 3 #define AAC_INIT_STRUCT_REVISION_4 4 #define AAC_INIT_STRUCT_MINIPORT_REVISION 1 #define AAC_INITFLAGS_NEW_COMM_SUPPORTED 1 #define AAC_PAGE_SIZE 4096 /* Used to set HostPhysMemPages */ /* * Shared data types */ /* * Container types */ #define CT_NONE 0 #define CT_VOLUME 1 #define CT_MIRROR 2 #define CT_STRIPE 3 #define CT_RAID5 4 #define CT_SSRW 5 #define CT_SSRO 6 #define CT_MORPH 7 #define CT_PASSTHRU 8 #define CT_RAID4 9 #define CT_RAID10 10 /* stripe of mirror */ #define CT_RAID00 11 /* stripe of stripe */ #define CT_VOLUME_OF_MIRRORS 12 /* volume of mirror */ #define CT_PSEUDO_RAID3 13 /* really raid4 */ #define CT_RAID50 14 /* stripe of raid5 */ #define CT_RAID5D 15 /* raid5 distributed hot-sparing */ #define CT_RAID5D0 16 #define CT_RAID1E 17 /* extended raid1 mirroring */ #define CT_RAID6 18 #define CT_RAID60 19 /* * Host-addressable object types */ #define FT_REG 1 /* regular file */ #define FT_DIR 2 /* directory */ #define FT_BLK 3 /* "block" device - reserved */ #define FT_CHR 4 /* "character special" device - reserved */ #define FT_LNK 5 /* symbolic link */ #define FT_SOCK 6 /* socket */ #define FT_FIFO 7 /* fifo */ #define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */ #define FT_DRIVE 9 /* phys disk - addressable in scsi by bus/target/lun */ #define FT_SLICE 10 /* virtual disk - raw volume - slice */ #define FT_PARTITION 11 /* FSA part, inside slice, container building block */ #define FT_VOLUME 12 /* Container - Volume Set */ #define FT_STRIPE 13 /* Container - Stripe Set */ #define FT_MIRROR 14 /* Container - Mirror Set */ #define FT_RAID5 15 /* Container - Raid 5 Set */ #define FT_DATABASE 16 /* Storage object with "foreign" content manager */ /* * Host-side scatter/gather list for raw commands. */ struct aac_sg_entryraw { u_int32_t Next; /* reserved for FW use */ u_int32_t Prev; /* reserved for FW use */ u_int64_t SgAddress; u_int32_t SgByteCount; u_int32_t Flags; /* reserved for FW use */ } __packed; struct aac_sg_tableraw { u_int32_t SgCount; struct aac_sg_entryraw SgEntryRaw[0]; } __packed; /* * Host-side scatter/gather list for 32-bit commands. */ struct aac_sg_entry { u_int32_t SgAddress; u_int32_t SgByteCount; } __packed; struct aac_sg_table { u_int32_t SgCount; struct aac_sg_entry SgEntry[0]; } __packed; /* * Host-side scatter/gather list for 64-bit commands. */ struct aac_sg_entry64 { u_int64_t SgAddress; u_int32_t SgByteCount; } __packed; struct aac_sg_table64 { u_int32_t SgCount; struct aac_sg_entry64 SgEntry64[0]; } __packed; /* * Container creation data */ struct aac_container_creation { u_int8_t ViaBuildNumber; u_int8_t MicroSecond; u_int8_t Via; /* 1 = FSU, 2 = API, etc. */ u_int8_t YearsSince1900; u_int32_t Month:4; /* 1-12 */ u_int32_t Day:6; /* 1-32 */ u_int32_t Hour:6; /* 0-23 */ u_int32_t Minute:6; /* 0-59 */ u_int32_t Second:6; /* 0-59 */ u_int64_t ViaAdapterSerialNumber; } __packed; typedef enum { RevApplication = 1, RevDkiCli, RevNetService, RevApi, RevFileSysDriver, RevMiniportDriver, RevAdapterSW, RevMonitor, RevRemoteApi, } RevComponent; struct FsaRevision { union { struct { u_int8_t dash; u_int8_t type; u_int8_t minor; u_int8_t major; } comp; u_int32_t ul; } external; u_int32_t buildNumber; } __packed; /* * Adapter Information */ #define CPU_NTSIM 1 #define CPU_I960 2 #define CPU_ARM 3 #define CPU_SPARC 4 #define CPU_POWERPC 5 #define CPU_ALPHA 6 #define CPU_P7 7 #define CPU_I960_RX 8 #define CPU__last 9 #define CPUI960_JX 1 #define CPUI960_CX 2 #define CPUI960_HX 3 #define CPUI960_RX 4 #define CPUARM_SA110 5 #define CPUARM_xxx 6 #define CPUPPC_603e 7 #define CPUPPC_xxx 8 #define CPUI80303 9 #define CPU_XSCALE_80321 10 #define CPU_MIPS_4KC 11 #define CPU_MIPS_5KC 12 #define CPUSUBTYPE__last 13 #define PLAT_NTSIM 1 #define PLAT_V3ADU 2 #define PLAT_CYCLONE 3 #define PLAT_CYCLONE_HD 4 #define PLAT_BATBOARD 5 #define PLAT_BATBOARD_HD 6 #define PLAT_YOLO 7 #define PLAT_COBRA 8 #define PLAT_ANAHEIM 9 #define PLAT_JALAPENO 10 #define PLAT_QUEENS 11 #define PLAT_JALAPENO_DELL 12 #define PLAT_POBLANO 13 #define PLAT_POBLANO_OPAL 14 #define PLAT_POBLANO_SL0 15 #define PLAT_POBLANO_SL1 16 #define PLAT_POBLANO_SL2 17 #define PLAT_POBLANO_XXX 18 #define PLAT_JALAPENO_P2 19 #define PLAT_HABANERO 20 #define PLAT_VULCAN 21 #define PLAT_CRUSADER 22 #define PLAT_LANCER 23 #define PLAT_HARRIER 24 #define PLAT_TERMINATOR 25 #define PLAT_SKYHAWK 26 #define PLAT_CORSAIR 27 #define PLAT_JAGUAR 28 #define PLAT_SATAHAWK 29 #define PLAT_SATANATOR 30 #define PLAT_PROWLER 31 #define PLAT_BLACKBIRD 32 #define PLAT_SABREEXPRESS 33 #define PLAT_INTRUDER 34 #define PLAT__last 35 #define OEM_FLAVOR_ADAPTEC 1 #define OEM_FLAVOR_DELL 2 #define OEM_FLAVOR_HP 3 #define OEM_FLAVOR_IBM 4 #define OEM_FLAVOR_CPQ 5 #define OEM_FLAVOR_FSC 6 #define OEM_FLAVOR_DWS 7 #define OEM_FLAVOR_BRAND_Z 8 #define OEM_FLAVOR_LEGEND 9 #define OEM_FLAVOR_HITACHI 10 #define OEM_FLAVOR_ESG 11 #define OEM_FLAVOR_ICP 12 #define OEM_FLAVOR_SCM 13 #define OEM_FLAVOR__last 14 /* * XXX the aac-2622 with no battery present reports PLATFORM_BAT_OPT_PRESENT */ #define PLATFORM_BAT_REQ_PRESENT 1 /* BATTERY REQUIRED AND PRESENT */ #define PLATFORM_BAT_REQ_NOTPRESENT 2 /* BATTERY REQUIRED AND NOT PRESENT */ #define PLATFORM_BAT_OPT_PRESENT 3 /* BATTERY OPTIONAL AND PRESENT */ #define PLATFORM_BAT_OPT_NOTPRESENT 4 /* BATTERY OPTIONAL AND NOT PRESENT */ #define PLATFORM_BAT_NOT_SUPPORTED 5 /* BATTERY NOT SUPPORTED */ /* * options supported by this board * there has to be a one to one mapping of these defines and the ones in * fsaapi.h, search for FSA_SUPPORT_SNAPSHOT */ #define AAC_SUPPORTED_SNAPSHOT 0x01 #define AAC_SUPPORTED_CLUSTERS 0x02 #define AAC_SUPPORTED_WRITE_CACHE 0x04 #define AAC_SUPPORTED_64BIT_DATA 0x08 #define AAC_SUPPORTED_HOST_TIME_FIB 0x10 #define AAC_SUPPORTED_RAID50 0x20 #define AAC_SUPPORTED_4GB_WINDOW 0x40 #define AAC_SUPPORTED_SCSI_UPGRADEABLE 0x80 #define AAC_SUPPORTED_SOFT_ERR_REPORT 0x100 #define AAC_SUPPORTED_NOT_RECONDITION 0x200 #define AAC_SUPPORTED_SGMAP_HOST64 0x400 #define AAC_SUPPORTED_ALARM 0x800 #define AAC_SUPPORTED_NONDASD 0x1000 #define AAC_SUPPORTED_SCSI_MANAGED 0x2000 #define AAC_SUPPORTED_RAID_SCSI_MODE 0x4000 #define AAC_SUPPORTED_SUPPLEMENT_ADAPTER_INFO 0x10000 #define AAC_SUPPORTED_NEW_COMM 0x20000 #define AAC_SUPPORTED_64BIT_ARRAYSIZE 0x40000 #define AAC_SUPPORTED_HEAT_SENSOR 0x80000 /* * Structure used to respond to a RequestAdapterInfo fib. */ struct aac_adapter_info { u_int32_t PlatformBase; /* adapter type */ u_int32_t CpuArchitecture; /* adapter CPU type */ u_int32_t CpuVariant; /* adapter CPU subtype */ u_int32_t ClockSpeed; /* adapter CPU clockspeed */ u_int32_t ExecutionMem; /* adapter Execution Memory size */ u_int32_t BufferMem; /* adapter Data Memory */ u_int32_t TotalMem; /* adapter Total Memory */ struct FsaRevision KernelRevision; /* adapter Kernel SW Revision */ struct FsaRevision MonitorRevision; /* adapter Monitor/Diag SW Rev */ struct FsaRevision HardwareRevision; /* TDB */ struct FsaRevision BIOSRevision; /* adapter BIOS Revision */ u_int32_t ClusteringEnabled; u_int32_t ClusterChannelMask; u_int64_t SerialNumber; u_int32_t batteryPlatform; u_int32_t SupportedOptions; /* supported features of this ctrlr */ u_int32_t OemVariant; } __packed; /* * Monitor/Kernel interface. */ /* * Synchronous commands to the monitor/kernel. */ #define AAC_MONKER_BREAKPOINT 0x04 #define AAC_MONKER_INITSTRUCT 0x05 #define AAC_MONKER_SYNCFIB 0x0c #define AAC_MONKER_GETKERNVER 0x11 #define AAC_MONKER_POSTRESULTS 0x14 #define AAC_MONKER_GETINFO 0x19 #define AAC_MONKER_GETDRVPROP 0x23 #define AAC_MONKER_RCVTEMP 0x25 #define AAC_MONKER_GETCOMMPREF 0x26 #define AAC_MONKER_REINIT 0xee /* * Command status values */ #define ST_OK 0 #define ST_PERM 1 #define ST_NOENT 2 #define ST_IO 5 #define ST_NXIO 6 #define ST_E2BIG 7 #define ST_ACCES 13 #define ST_EXIST 17 #define ST_XDEV 18 #define ST_NODEV 19 #define ST_NOTDIR 20 #define ST_ISDIR 21 #define ST_INVAL 22 #define ST_FBIG 27 #define ST_NOSPC 28 #define ST_ROFS 30 #define ST_MLINK 31 #define ST_WOULDBLOCK 35 #define ST_NAMETOOLONG 63 #define ST_NOTEMPTY 66 #define ST_DQUOT 69 #define ST_STALE 70 #define ST_REMOTE 71 #define ST_BADHANDLE 10001 #define ST_NOT_SYNC 10002 #define ST_BAD_COOKIE 10003 #define ST_NOTSUPP 10004 #define ST_TOOSMALL 10005 #define ST_SERVERFAULT 10006 #define ST_BADTYPE 10007 #define ST_JUKEBOX 10008 #define ST_NOTMOUNTED 10009 #define ST_MAINTMODE 10010 #define ST_STALEACL 10011 /* * Volume manager commands */ #define VM_Null 0 #define VM_NameServe 1 #define VM_ContainerConfig 2 #define VM_Ioctl 3 #define VM_FilesystemIoctl 4 #define VM_CloseAll 5 #define VM_CtBlockRead 6 #define VM_CtBlockWrite 7 #define VM_SliceBlockRead 8 /* raw access to configured "storage objects" */ #define VM_SliceBlockWrite 9 #define VM_DriveBlockRead 10 /* raw access to physical devices */ #define VM_DriveBlockWrite 11 #define VM_EnclosureMgt 12 /* enclosure management */ #define VM_Unused 13 /* used to be diskset management */ #define VM_CtBlockVerify 14 #define VM_CtPerf 15 /* performance test */ #define VM_CtBlockRead64 16 #define VM_CtBlockWrite64 17 #define VM_CtBlockVerify64 18 #define VM_CtHostRead64 19 #define VM_CtHostWrite64 20 #define VM_DrvErrTblLog 21 /* drive error table/log type of command */ #define VM_NameServe64 22 /* * "Mountable object" */ struct aac_mntobj { u_int32_t ObjectId; char FileSystemName[16]; struct aac_container_creation CreateInfo; u_int32_t Capacity; u_int32_t VolType; u_int32_t ObjType; u_int32_t ContentState; #define AAC_FSCS_READONLY 0x0002 /* XXX need more information than this */ union { u_int32_t pad[8]; } ObjExtension; u_int32_t AlterEgoId; u_int32_t CapacityHigh; /* Only if VM_NameServe64 */ } __packed; struct aac_mntinfo { u_int32_t Command; u_int32_t MntType; u_int32_t MntCount; } __packed; struct aac_mntinforesponse { u_int32_t Status; u_int32_t MntType; u_int32_t MntRespCount; struct aac_mntobj MntTable[1]; } __packed; /* * Container shutdown command. */ struct aac_closecommand { u_int32_t Command; u_int32_t ContainerId; } __packed; /* * Container Config Command */ #define CT_GET_SCSI_METHOD 64 struct aac_ctcfg { u_int32_t Command; u_int32_t cmd; u_int32_t param; } __packed; struct aac_ctcfg_resp { u_int32_t Status; u_int32_t resp; u_int32_t param; } __packed; /* * 'Ioctl' commands */ #define AAC_SCSI_MAX_PORTS 10 #define AAC_BUS_NO_EXIST 0 #define AAC_BUS_VALID 1 #define AAC_BUS_FAULTED 2 #define AAC_BUS_DISABLED 3 #define GetBusInfo 0x9 struct aac_getbusinf { u_int32_t ProbeComplete; u_int32_t BusCount; u_int32_t TargetsPerBus; u_int8_t InitiatorBusId[AAC_SCSI_MAX_PORTS]; u_int8_t BusValid[AAC_SCSI_MAX_PORTS]; } __packed; struct aac_vmioctl { u_int32_t Command; u_int32_t ObjType; u_int32_t MethId; u_int32_t ObjId; u_int32_t IoctlCmd; u_int32_t IoctlBuf[1]; /* Placeholder? */ } __packed; struct aac_vmi_businf_resp { u_int32_t Status; u_int32_t ObjType; u_int32_t MethId; u_int32_t ObjId; u_int32_t IoctlCmd; struct aac_getbusinf BusInf; } __packed; #if 0 #define AAC_BTL_TO_HANDLE(b, t, l) \ (((b & 0x3f) << 7) | ((l & 0x7) << 4) | (t & 0xf)) #else #define AAC_BTL_TO_HANDLE(b, t, l) \ ((((u_int32_t)b & 0x0f) << 24) | \ (((u_int32_t)l & 0xff) << 16) | \ ((u_int32_t)t & 0xffff)) #endif #define GetDeviceProbeInfo 0x5 struct aac_vmi_devinfo_resp { u_int32_t Status; u_int32_t ObjType; u_int32_t MethId; u_int32_t ObjId; u_int32_t IoctlCmd; u_int8_t VendorId[8]; u_int8_t ProductId[16]; u_int8_t ProductRev[4]; u_int32_t Inquiry7; u_int32_t align1; u_int32_t Inquiry0; u_int32_t align2; u_int32_t Inquiry1; u_int32_t align3; u_int32_t reserved[2]; u_int8_t VendorSpecific[20]; u_int32_t Smart:1; u_int32_t AAC_Managed:1; u_int32_t align4; u_int32_t reserved2:6; u_int32_t Bus; u_int32_t Target; u_int32_t Lun; u_int32_t ultraEnable:1, disconnectEnable:1, fast20EnabledW:1, scamDevice:1, scamTolerant:1, setForSync:1, setForWide:1, syncDevice:1, wideDevice:1, reserved1:7, ScsiRate:8, ScsiOffset:8; }; /* Do not pack */ #define ResetBus 0x16 struct aac_resetbus { u_int32_t BusNumber; }; /* * Write 'stability' options. */ #define CSTABLE 1 #define CUNSTABLE 2 /* * Commit level response for a write request. */ #define CMFILE_SYNC_NVRAM 1 #define CMDATA_SYNC_NVRAM 2 #define CMFILE_SYNC 3 #define CMDATA_SYNC 4 #define CMUNSTABLE 5 /* * Block read/write operations. These structures are packed into the 'data' * area in the FIB. */ struct aac_blockread { u_int32_t Command; /* not FSACommand! */ u_int32_t ContainerId; u_int32_t BlockNumber; u_int32_t ByteCount; struct aac_sg_table SgMap; /* variable size */ } __packed; struct aac_blockread64 { u_int32_t Command; /* not FSACommand! */ u_int16_t ContainerId; u_int16_t SectorCount; u_int32_t BlockNumber; u_int16_t Pad; u_int16_t Flags; struct aac_sg_table64 SgMap64; /* variable size */ } __packed; struct aac_blockread_response { u_int32_t Status; u_int32_t ByteCount; } __packed; struct aac_blockwrite { u_int32_t Command; /* not FSACommand! */ u_int32_t ContainerId; u_int32_t BlockNumber; u_int32_t ByteCount; u_int32_t Stable; struct aac_sg_table SgMap; /* variable size */ } __packed; struct aac_blockwrite64 { u_int32_t Command; /* not FSACommand! */ u_int16_t ContainerId; u_int16_t SectorCount; u_int32_t BlockNumber; u_int16_t Pad; u_int16_t Flags; struct aac_sg_table64 SgMap64; /* variable size */ } __packed; struct aac_blockwrite_response { u_int32_t Status; u_int32_t ByteCount; u_int32_t Committed; } __packed; struct aac_raw_io { u_int64_t BlockNumber; u_int32_t ByteCount; u_int16_t ContainerId; u_int16_t Flags; /* 0: W, 1: R */ u_int16_t BpTotal; /* reserved for FW use */ u_int16_t BpComplete; /* reserved for FW use */ struct aac_sg_tableraw SgMapRaw; /* variable size */ } __packed; struct aac_close_command { u_int32_t Command; u_int32_t ContainerId; } __packed; /* * SCSI Passthrough structures */ struct aac_srb32 { u_int32_t function; u_int32_t bus; u_int32_t target; u_int32_t lun; u_int32_t timeout; u_int32_t flags; u_int32_t data_len; u_int32_t retry_limit; u_int32_t cdb_len; u_int8_t cdb[16]; struct aac_sg_table sg_map32; }; #define AAC_SRB_FUNC_EXECUTE_SCSI 0x00 #define AAC_SRB_FUNC_CLAIM_DEVICE 0x01 #define AAC_SRB_FUNC_IO_CONTROL 0x02 #define AAC_SRB_FUNC_RECEIVE_EVENT 0x03 #define AAC_SRB_FUNC_RELEASE_QUEUE 0x04 #define AAC_SRB_FUNC_ATTACH_DEVICE 0x05 #define AAC_SRB_FUNC_RELEASE_DEVICE 0x06 #define AAC_SRB_FUNC_SHUTDOWN 0x07 #define AAC_SRB_FUNC_FLUSH 0x08 #define AAC_SRB_FUNC_ABORT_COMMAND 0x10 #define AAC_SRB_FUNC_RELEASE_RECOVERY 0x11 #define AAC_SRB_FUNC_RESET_BUS 0x12 #define AAC_SRB_FUNC_RESET_DEVICE 0x13 #define AAC_SRB_FUNC_TERMINATE_IO 0x14 #define AAC_SRB_FUNC_FLUSH_QUEUE 0x15 #define AAC_SRB_FUNC_REMOVE_DEVICE 0x16 #define AAC_SRB_FUNC_DOMAIN_VALIDATION 0x17 #define AAC_SRB_FLAGS_NO_DATA_XFER 0x0000 #define AAC_SRB_FLAGS_DISABLE_DISCONNECT 0x0004 #define AAC_SRB_FLAGS_DISABLE_SYNC_TRANSFER 0x0008 #define AAC_SRB_FLAGS_BYPASS_FROZEN_QUEUE 0x0010 #define AAC_SRB_FLAGS_DISABLE_AUTOSENSE 0x0020 #define AAC_SRB_FLAGS_DATA_IN 0x0040 #define AAC_SRB_FLAGS_DATA_OUT 0x0080 #define AAC_SRB_FLAGS_UNSPECIFIED_DIRECTION \ (AAC_SRB_FLAGS_DATA_IN | AAC_SRB_FLAGS_DATA_OUT) #define AAC_HOST_SENSE_DATA_MAX 30 struct aac_srb_response { u_int32_t fib_status; u_int32_t srb_status; u_int32_t scsi_status; u_int32_t data_len; u_int32_t sense_len; u_int8_t sense[AAC_HOST_SENSE_DATA_MAX]; }; /* * Status codes for SCSI passthrough commands. Since they are based on ASPI, * they also exactly match CAM status codes in both enumeration and meaning. * They seem to also be used as status codes for synchronous FIBs. */ #define AAC_SRB_STS_PENDING 0x00 #define AAC_SRB_STS_SUCCESS 0x01 #define AAC_SRB_STS_ABORTED 0x02 #define AAC_SRB_STS_ABORT_FAILED 0x03 #define AAC_SRB_STS_ERROR 0x04 #define AAC_SRB_STS_BUSY 0x05 #define AAC_SRB_STS_INVALID_REQUEST 0x06 #define AAC_SRB_STS_INVALID_PATH_ID 0x07 #define AAC_SRB_STS_NO_DEVICE 0x08 #define AAC_SRB_STS_TIMEOUT 0x09 #define AAC_SRB_STS_SELECTION_TIMEOUT 0x0a #define AAC_SRB_STS_COMMAND_TIMEOUT 0x0b #define AAC_SRB_STS_MESSAGE_REJECTED 0x0d #define AAC_SRB_STS_BUS_RESET 0x0e #define AAC_SRB_STS_PARITY_ERROR 0x0f #define AAC_SRB_STS_REQUEST_SENSE_FAILED 0x10 #define AAC_SRB_STS_NO_HBA 0x11 #define AAC_SRB_STS_DATA_OVERRUN 0x12 #define AAC_SRB_STS_UNEXPECTED_BUS_FREE 0x13 #define AAC_SRB_STS_PHASE_SEQUENCE_FAILURE 0x14 #define AAC_SRB_STS_BAD_SRB_BLOCK_LENGTH 0x15 #define AAC_SRB_STS_REQUEST_FLUSHED 0x16 #define AAC_SRB_STS_INVALID_LUN 0x20 #define AAC_SRB_STS_INVALID_TARGET_ID 0x21 #define AAC_SRB_STS_BAD_FUNCTION 0x22 #define AAC_SRB_STS_ERROR_RECOVER 0x23 /* * Register set for adapters based on the Falcon bridge and PPC core */ #define AAC_FA_DOORBELL0_CLEAR 0x00 #define AAC_FA_DOORBELL1_CLEAR 0x02 #define AAC_FA_DOORBELL0 0x04 #define AAC_FA_DOORBELL1 0x06 #define AAC_FA_MASK0_CLEAR 0x08 #define AAC_FA_MASK1_CLEAR 0x0a #define AAC_FA_MASK0 0x0c #define AAC_FA_MASK1 0x0e #define AAC_FA_MAILBOX 0x10 #define AAC_FA_FWSTATUS 0x2c /* Mailbox 7 */ #define AAC_FA_INTSRC 0x900 #define AAC_FA_HACK(sc) (void)AAC_GETREG4(sc, AAC_FA_INTSRC) /* * Register definitions for the Adaptec AAC-364 'Jalapeno I/II' adapters, based * on the SA110 'StrongArm'. */ #define AAC_REGSIZE 0x100 /* doorbell 0 (adapter->host) */ #define AAC_SA_DOORBELL0_CLEAR 0x98 #define AAC_SA_DOORBELL0_SET 0x9c #define AAC_SA_DOORBELL0 0x9c #define AAC_SA_MASK0_CLEAR 0xa0 #define AAC_SA_MASK0_SET 0xa4 /* doorbell 1 (host->adapter) */ #define AAC_SA_DOORBELL1_CLEAR 0x9a #define AAC_SA_DOORBELL1_SET 0x9e #define AAC_SA_MASK1_CLEAR 0xa2 #define AAC_SA_MASK1_SET 0xa6 /* mailbox (20 bytes) */ #define AAC_SA_MAILBOX 0xa8 #define AAC_SA_FWSTATUS 0xc4 /* * Register definitions for the Adaptec 'Pablano' adapters, based on the * i960Rx, and other related adapters. */ #define AAC_RX_IDBR 0x20 /* inbound doorbell */ #define AAC_RX_IISR 0x24 /* inbound interrupt status */ #define AAC_RX_IIMR 0x28 /* inbound interrupt mask */ #define AAC_RX_ODBR 0x2c /* outbound doorbell */ #define AAC_RX_OISR 0x30 /* outbound interrupt status */ #define AAC_RX_OIMR 0x34 /* outbound interrupt mask */ #define AAC_RX_IQUE 0x40 /* inbound queue */ #define AAC_RX_OQUE 0x44 /* outbound queue */ #define AAC_RX_MAILBOX 0x50 /* mailbox (20 bytes) */ #define AAC_RX_FWSTATUS 0x6c /* * Register definitions for the Adaptec 'Rocket' RAID-On-Chip adapters. * Unsurprisingly, it's quite similar to the i960! */ #define AAC_RKT_IDBR 0x20 /* inbound doorbell register */ #define AAC_RKT_IISR 0x24 /* inbound interrupt status register */ #define AAC_RKT_IIMR 0x28 /* inbound interrupt mask register */ #define AAC_RKT_ODBR 0x2c /* outbound doorbell register */ #define AAC_RKT_OISR 0x30 /* outbound interrupt status register */ #define AAC_RKT_OIMR 0x34 /* outbound interrupt mask register */ #define AAC_RKT_IQUE 0x40 /* inbound queue */ #define AAC_RKT_OQUE 0x44 /* outbound queue */ #define AAC_RKT_MAILBOX 0x1000 /* mailbox */ #define AAC_RKT_FWSTATUS 0x101c /* Firmware Status (mailbox 7) */ /* * Common bit definitions for the doorbell registers. */ /* * Status bits in the doorbell registers. */ #define AAC_DB_SYNC_COMMAND (1<<0) /* send/completed synchronous FIB */ #define AAC_DB_COMMAND_READY (1<<1) /* posted one or more commands */ #define AAC_DB_RESPONSE_READY (1<<2) /* one or more commands complete */ #define AAC_DB_COMMAND_NOT_FULL (1<<3) /* command queue not full */ #define AAC_DB_RESPONSE_NOT_FULL (1<<4) /* response queue not full */ /* * The adapter can request the host print a message by setting the * DB_PRINTF flag in DOORBELL0. The driver responds by collecting the * message from the printf buffer, clearing the DB_PRINTF flag in * DOORBELL0 and setting it in DOORBELL1. * (ODBR and IDBR respectively for the i960Rx adapters) */ #define AAC_DB_PRINTF (1<<5) /* adapter requests host printf */ #define AAC_PRINTF_DONE (1<<5) /* host completed printf processing */ /* * Mask containing the interrupt bits we care about. We don't anticipate * (or want) interrupts not in this mask. */ #define AAC_DB_INTERRUPTS \ (AAC_DB_COMMAND_READY | AAC_DB_RESPONSE_READY | AAC_DB_PRINTF) #define AAC_DB_INT_NEW_COMM 0x08 /* * Queue names * * Note that we base these at 0 in order to use them as array indices. Adaptec * used base 1 for some unknown reason, and sorted them in a different order. */ #define AAC_HOST_NORM_CMD_QUEUE 0 #define AAC_HOST_HIGH_CMD_QUEUE 1 #define AAC_ADAP_NORM_CMD_QUEUE 2 #define AAC_ADAP_HIGH_CMD_QUEUE 3 #define AAC_HOST_NORM_RESP_QUEUE 4 #define AAC_HOST_HIGH_RESP_QUEUE 5 #define AAC_ADAP_NORM_RESP_QUEUE 6 #define AAC_ADAP_HIGH_RESP_QUEUE 7 /* * List structure used to chain FIBs (used by the adapter - we hang FIBs off * our private command structure and don't touch these) */ struct aac_fib_list_entry { u_int32_t Flink; u_int32_t Blink; } __packed; /* * FIB (FSA Interface Block?); this is the datastructure passed between the * host and adapter. */ struct aac_fib_header { u_int32_t XferState; u_int16_t Command; u_int8_t StructType; u_int8_t Flags; u_int16_t Size; u_int16_t SenderSize; u_int32_t SenderFibAddress; u_int32_t ReceiverFibAddress; u_int32_t SenderData; union { struct { u_int32_t ReceiverTimeStart; u_int32_t ReceiverTimeDone; } _s; struct aac_fib_list_entry FibLinks; } _u; } __packed; #define AAC_FIB_DATASIZE (512 - sizeof(struct aac_fib_header)) struct aac_fib { struct aac_fib_header Header; u_int8_t data[AAC_FIB_DATASIZE]; } __packed; /* * FIB commands */ #define TestCommandResponse 1 #define TestAdapterCommand 2 /* Lowlevel and comm commands */ #define LastTestCommand 100 #define ReinitHostNormCommandQueue 101 #define ReinitHostHighCommandQueue 102 #define ReinitHostHighRespQueue 103 #define ReinitHostNormRespQueue 104 #define ReinitAdapNormCommandQueue 105 #define ReinitAdapHighCommandQueue 107 #define ReinitAdapHighRespQueue 108 #define ReinitAdapNormRespQueue 109 #define InterfaceShutdown 110 #define DmaCommandFib 120 #define StartProfile 121 #define TermProfile 122 #define SpeedTest 123 #define TakeABreakPt 124 #define RequestPerfData 125 #define SetInterruptDefTimer 126 #define SetInterruptDefCount 127 #define GetInterruptDefStatus 128 #define LastCommCommand 129 /* filesystem commands */ #define NuFileSystem 300 #define UFS 301 #define HostFileSystem 302 #define LastFileSystemCommand 303 /* Container Commands */ #define ContainerCommand 500 #define ContainerCommand64 501 #define RawIo 502 /* Cluster Commands */ #define ClusterCommand 550 /* Scsi Port commands (scsi passthrough) */ #define ScsiPortCommand 600 #define ScsiPortCommandU64 601 #define SataPortCommandU64 602 #define SasSmpPassThrough 603 #define SasRequestPhyInfo 612 /* Misc house keeping and generic adapter initiated commands */ #define AifRequest 700 #define CheckRevision 701 #define FsaHostShutdown 702 #define RequestAdapterInfo 703 #define IsAdapterPaused 704 #define SendHostTime 705 #define RequestSupplementAdapterInfo 706 /* Supp. Info for set in UCC * use only if supported * (RequestAdapterInfo first) */ #define LastMiscCommand 707 #define OnLineDiagnostic 800 #define FduAdapterTest 801 #define RequestCompatibilityId 802 #define AdapterEnvironmentInfo 803 /* temp. sensors */ #define NvsramEventLog 900 #define ResetNvsramEventLogPointers 901 #define EnableEventLog 902 #define DisableEventLog 903 #define EncryptedKeyTransportFIB 904 #define KeyableFeaturesFIB 905 /* * FIB types */ #define AAC_FIBTYPE_TFIB 1 #define AAC_FIBTYPE_TQE 2 #define AAC_FIBTYPE_TCTPERF 3 /* * FIB transfer state */ #define AAC_FIBSTATE_HOSTOWNED (1<<0) /* owned by the host */ #define AAC_FIBSTATE_ADAPTEROWNED (1<<1) /* owned by the adapter */ #define AAC_FIBSTATE_INITIALISED (1<<2) /* initialised */ #define AAC_FIBSTATE_EMPTY (1<<3) /* empty */ #define AAC_FIBSTATE_FROMPOOL (1<<4) /* allocated from pool */ #define AAC_FIBSTATE_FROMHOST (1<<5) /* sent from the host */ #define AAC_FIBSTATE_FROMADAP (1<<6) /* sent from the adapter */ #define AAC_FIBSTATE_REXPECTED (1<<7) /* response is expected */ #define AAC_FIBSTATE_RNOTEXPECTED (1<<8) /* response is not expected */ #define AAC_FIBSTATE_DONEADAP (1<<9) /* processed by the adapter */ #define AAC_FIBSTATE_DONEHOST (1<<10) /* processed by the host */ #define AAC_FIBSTATE_HIGH (1<<11) /* high priority */ #define AAC_FIBSTATE_NORM (1<<12) /* normal priority */ #define AAC_FIBSTATE_ASYNC (1<<13) #define AAC_FIBSTATE_ASYNCIO (1<<13) /* to be removed */ #define AAC_FIBSTATE_PAGEFILEIO (1<<14) /* to be removed */ #define AAC_FIBSTATE_SHUTDOWN (1<<15) #define AAC_FIBSTATE_LAZYWRITE (1<<16) /* to be removed */ #define AAC_FIBSTATE_ADAPMICROFIB (1<<17) #define AAC_FIBSTATE_BIOSFIB (1<<18) #define AAC_FIBSTATE_FAST_RESPONSE (1<<19) /* fast response capable */ #define AAC_FIBSTATE_APIFIB (1<<20) /* * FIB error values */ #define AAC_ERROR_NORMAL 0x00 #define AAC_ERROR_PENDING 0x01 #define AAC_ERROR_FATAL 0x02 #define AAC_ERROR_INVALID_QUEUE 0x03 #define AAC_ERROR_NOENTRIES 0x04 #define AAC_ERROR_SENDFAILED 0x05 #define AAC_ERROR_INVALID_QUEUE_PRIORITY 0x06 #define AAC_ERROR_FIB_ALLOCATION_FAILED 0x07 #define AAC_ERROR_FIB_DEALLOCATION_FAILED 0x08 /* * Adapter Status Register * * Phase Status mailbox is 32bits: * <31:16> = Phase Status * <15:0> = Phase * * The adapter reports its present state through the phase. Only * a single phase should be ever be set. Each phase can have multiple * phase status bits to provide more detailed information about the * state of the adapter. */ #define AAC_SELF_TEST_FAILED 0x00000004 #define AAC_MONITOR_PANIC 0x00000020 #define AAC_UP_AND_RUNNING 0x00000080 #define AAC_KERNEL_PANIC 0x00000100 /* * Data types relating to control and monitoring of the NVRAM/WriteCache * subsystem. */ #define AAC_NFILESYS 24 /* maximum number of filesystems */ /* * NVRAM/Write Cache subsystem states */ typedef enum { NVSTATUS_DISABLED = 0, /* present, clean, not being used */ NVSTATUS_ENABLED, /* present, possibly dirty, ready for use */ NVSTATUS_ERROR, /* present, dirty, contains dirty data */ NVSTATUS_BATTERY, /* present, bad or low battery, may contain * dirty data */ NVSTATUS_UNKNOWN /* for bad/missing device */ } AAC_NVSTATUS; /* * NVRAM/Write Cache subsystem battery component states * */ typedef enum { NVBATTSTATUS_NONE = 0, /* battery has no power or is not present */ NVBATTSTATUS_LOW, /* battery is low on power */ NVBATTSTATUS_OK, /* battery is okay - normal operation possible * only in this state */ NVBATTSTATUS_RECONDITIONING /* no battery present - reconditioning * in process */ } AAC_NVBATTSTATUS; /* * Battery transition type */ typedef enum { NVBATT_TRANSITION_NONE = 0, /* battery now has no power or is not * present */ NVBATT_TRANSITION_LOW, /* battery is now low on power */ NVBATT_TRANSITION_OK /* battery is now okay - normal * operation possible only in this * state */ } AAC_NVBATT_TRANSITION; /* * NVRAM Info structure returned for NVRAM_GetInfo call */ struct aac_nvramdevinfo { u_int32_t NV_Enabled; /* write caching enabled */ u_int32_t NV_Error; /* device in error state */ u_int32_t NV_NDirty; /* count of dirty NVRAM buffers */ u_int32_t NV_NActive; /* count of NVRAM buffers being * written */ } __packed; struct aac_nvraminfo { AAC_NVSTATUS NV_Status; /* nvram subsystem status */ AAC_NVBATTSTATUS NV_BattStatus; /* battery status */ u_int32_t NV_Size; /* size of WriteCache NVRAM in * bytes */ u_int32_t NV_BufSize; /* size of NVRAM buffers in * bytes */ u_int32_t NV_NBufs; /* number of NVRAM buffers */ u_int32_t NV_NDirty; /* Num dirty NVRAM buffers */ u_int32_t NV_NClean; /* Num clean NVRAM buffers */ u_int32_t NV_NActive; /* Num NVRAM buffers being * written */ u_int32_t NV_NBrokered; /* Num brokered NVRAM buffers */ struct aac_nvramdevinfo NV_DevInfo[AAC_NFILESYS]; /* per device * info */ u_int32_t NV_BattNeedsReconditioning; /* boolean */ u_int32_t NV_TotalSize; /* size of all non-volatile * memories in bytes */ } __packed; /* * Data types relating to adapter-initiated FIBs * * Based on types and structures in <aifstruc.h> */ /* * Progress Reports */ typedef enum { AifJobStsSuccess = 1, AifJobStsFinished, AifJobStsAborted, AifJobStsFailed, AifJobStsLastReportMarker = 100, /* All prior mean last report */ AifJobStsSuspended, AifJobStsRunning } AAC_AifJobStatus; typedef enum { AifJobScsiMin = 1, /* Minimum value for Scsi operation */ AifJobScsiZero, /* SCSI device clear operation */ AifJobScsiVerify, /* SCSI device Verify operation NO * REPAIR */ AifJobScsiExercise, /* SCSI device Exercise operation */ AifJobScsiVerifyRepair, /* SCSI device Verify operation WITH * repair */ AifJobScsiWritePattern, /* write pattern */ AifJobScsiMax = 99, /* Max Scsi value */ AifJobCtrMin, /* Min Ctr op value */ AifJobCtrZero, /* Container clear operation */ AifJobCtrCopy, /* Container copy operation */ AifJobCtrCreateMirror, /* Container Create Mirror operation */ AifJobCtrMergeMirror, /* Container Merge Mirror operation */ AifJobCtrScrubMirror, /* Container Scrub Mirror operation */ AifJobCtrRebuildRaid5, /* Container Rebuild Raid5 operation */ AifJobCtrScrubRaid5, /* Container Scrub Raid5 operation */ AifJobCtrMorph, /* Container morph operation */ AifJobCtrPartCopy, /* Container Partition copy operation */ AifJobCtrRebuildMirror, /* Container Rebuild Mirror operation */ AifJobCtrCrazyCache, /* crazy cache */ AifJobCtrCopyback, /* Container Copyback operation */ AifJobCtrCompactRaid5D, /* Container Compaction operation */ AifJobCtrExpandRaid5D, /* Container Expansion operation */ AifJobCtrRebuildRaid6, /* Container Rebuild Raid6 operation */ AifJobCtrScrubRaid6, /* Container Scrub Raid6 operation */ AifJobCtrSSBackup, /* Container snapshot backup task */ AifJobCtrMax = 199, /* Max Ctr type operation */ AifJobFsMin, /* Min Fs type operation */ AifJobFsCreate, /* File System Create operation */ AifJobFsVerify, /* File System Verify operation */ AifJobFsExtend, /* File System Extend operation */ AifJobFsMax = 299, /* Max Fs type operation */ AifJobApiFormatNTFS, /* Format a drive to NTFS */ AifJobApiFormatFAT, /* Format a drive to FAT */ AifJobApiUpdateSnapshot, /* update the read/write half of a * snapshot */ AifJobApiFormatFAT32, /* Format a drive to FAT32 */ AifJobApiMax = 399, /* Max API type operation */ AifJobCtlContinuousCtrVerify, /* Adapter operation */ AifJobCtlMax = 499 /* Max Adapter type operation */ } AAC_AifJobType; struct aac_AifContainers { u_int32_t src; /* from/master */ u_int32_t dst; /* to/slave */ } __packed; union aac_AifJobClient { struct aac_AifContainers container; /* For Container and * filesystem progress * ops; */ int32_t scsi_dh; /* For SCSI progress * ops */ }; struct aac_AifJobDesc { u_int32_t jobID; /* DO NOT FILL IN! Will be * filled in by AIF */ AAC_AifJobType type; /* Operation that is being * performed */ union aac_AifJobClient client; /* Details */ } __packed; struct aac_AifJobProgressReport { struct aac_AifJobDesc jd; AAC_AifJobStatus status; u_int32_t finalTick; u_int32_t currentTick; u_int32_t jobSpecificData1; u_int32_t jobSpecificData2; } __packed; /* * Event Notification */ typedef enum { /* General application notifies start here */ AifEnGeneric = 1, /* Generic notification */ AifEnTaskComplete, /* Task has completed */ AifEnConfigChange, /* Adapter config change occurred */ AifEnContainerChange, /* Adapter specific container * configuration change */ AifEnDeviceFailure, /* SCSI device failed */ AifEnMirrorFailover, /* Mirror failover started */ AifEnContainerEvent, /* Significant container event */ AifEnFileSystemChange, /* File system changed */ AifEnConfigPause, /* Container pause event */ AifEnConfigResume, /* Container resume event */ AifEnFailoverChange, /* Failover space assignment changed */ AifEnRAID5RebuildDone, /* RAID5 rebuild finished */ AifEnEnclosureManagement, /* Enclosure management event */ AifEnBatteryEvent, /* Significant NV battery event */ AifEnAddContainer, /* A new container was created. */ AifEnDeleteContainer, /* A container was deleted. */ AifEnSMARTEvent, /* SMART Event */ AifEnBatteryNeedsRecond, /* The battery needs reconditioning */ AifEnClusterEvent, /* Some cluster event */ AifEnDiskSetEvent, /* A disk set event occurred. */ AifDriverNotifyStart=199, /* Notifies for host driver go here */ /* Host driver notifications start here */ AifDenMorphComplete, /* A morph operation completed */ AifDenVolumeExtendComplete /* Volume expand operation completed */ } AAC_AifEventNotifyType; struct aac_AifEnsGeneric { char text[132]; /* Generic text */ } __packed; struct aac_AifEnsDeviceFailure { u_int32_t deviceHandle; /* SCSI device handle */ } __packed; struct aac_AifEnsMirrorFailover { u_int32_t container; /* Container with failed element */ u_int32_t failedSlice; /* Old slice which failed */ u_int32_t creatingSlice; /* New slice used for auto-create */ } __packed; struct aac_AifEnsContainerChange { u_int32_t container[2]; /* container that changed, -1 if no * container */ } __packed; struct aac_AifEnsContainerEvent { u_int32_t container; /* container number */ u_int32_t eventType; /* event type */ } __packed; struct aac_AifEnsEnclosureEvent { u_int32_t empID; /* enclosure management proc number */ u_int32_t unitID; /* unitId, fan id, power supply id, * slot id, tempsensor id. */ u_int32_t eventType; /* event type */ } __packed; struct aac_AifEnsBatteryEvent { AAC_NVBATT_TRANSITION transition_type; /* eg from low to ok */ AAC_NVBATTSTATUS current_state; /* current batt state */ AAC_NVBATTSTATUS prior_state; /* prev batt state */ } __packed; struct aac_AifEnsDiskSetEvent { u_int32_t eventType; u_int64_t DsNum; u_int64_t CreatorId; } __packed; typedef enum { CLUSTER_NULL_EVENT = 0, CLUSTER_PARTNER_NAME_EVENT, /* change in partner hostname or * adaptername from NULL to non-NULL */ /* (partner's agent may be up) */ CLUSTER_PARTNER_NULL_NAME_EVENT /* change in partner hostname or * adaptername from non-null to NULL */ /* (partner has rebooted) */ } AAC_ClusterAifEvent; struct aac_AifEnsClusterEvent { AAC_ClusterAifEvent eventType; } __packed; struct aac_AifEventNotify { AAC_AifEventNotifyType type; union { struct aac_AifEnsGeneric EG; struct aac_AifEnsDeviceFailure EDF; struct aac_AifEnsMirrorFailover EMF; struct aac_AifEnsContainerChange ECC; struct aac_AifEnsContainerEvent ECE; struct aac_AifEnsEnclosureEvent EEE; struct aac_AifEnsBatteryEvent EBE; struct aac_AifEnsDiskSetEvent EDS; /* struct aac_AifEnsSMARTEvent ES;*/ struct aac_AifEnsClusterEvent ECLE; } data; } __packed; /* * Adapter Initiated FIB command structures. Start with the adapter * initiated FIBs that really come from the adapter, and get responded * to by the host. */ #define AAC_AIF_REPORT_MAX_SIZE 64 typedef enum { AifCmdEventNotify = 1, /* Notify of event */ AifCmdJobProgress, /* Progress report */ AifCmdAPIReport, /* Report from other user of API */ AifCmdDriverNotify, /* Notify host driver of event */ AifReqJobList = 100, /* Gets back complete job list */ AifReqJobsForCtr, /* Gets back jobs for specific container */ AifReqJobsForScsi, /* Gets back jobs for specific SCSI device */ AifReqJobReport, /* Gets back a specific job report or list */ AifReqTerminateJob, /* Terminates job */ AifReqSuspendJob, /* Suspends a job */ AifReqResumeJob, /* Resumes a job */ AifReqSendAPIReport, /* API generic report requests */ AifReqAPIJobStart, /* Start a job from the API */ AifReqAPIJobUpdate, /* Update a job report from the API */ AifReqAPIJobFinish /* Finish a job from the API */ } AAC_AifCommand; struct aac_aif_command { AAC_AifCommand command; /* Tell host what type of * notify this is */ u_int32_t seqNumber; /* To allow ordering of * reports (if necessary) */ union { struct aac_AifEventNotify EN; /* Event notify */ struct aac_AifJobProgressReport PR[1]; /* Progress report */ u_int8_t AR[AAC_AIF_REPORT_MAX_SIZE]; u_int8_t data[AAC_FIB_DATASIZE - 8]; } data; } __packed; #endif /* !_PCI_AACREG_H_ */