# Makefile.in generated by automake 1.15.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2017 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright (C) 2012-2018 Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; see the file COPYING3. If not see # <http://www.gnu.org/licenses/>. # VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = doc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \ $(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../config/acx.m4 \ $(top_srcdir)/../config/depstand.m4 \ $(top_srcdir)/../config/gettext-sister.m4 \ $(top_srcdir)/../config/largefile.m4 \ $(top_srcdir)/../config/lcmessage.m4 \ $(top_srcdir)/../config/lead-dot.m4 \ $(top_srcdir)/../config/nls.m4 \ $(top_srcdir)/../config/override.m4 \ $(top_srcdir)/../config/plugins.m4 \ $(top_srcdir)/../config/po.m4 \ $(top_srcdir)/../config/progtest.m4 \ $(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \ $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \ $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \ $(top_srcdir)/acinclude.m4 $(top_srcdir)/../bfd/version.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = AM_V_DVIPS = $(am__v_DVIPS_@AM_V@) am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@) am__v_DVIPS_0 = @echo " DVIPS " $@; am__v_DVIPS_1 = AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@) am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@) am__v_MAKEINFO_0 = @echo " MAKEINFO" $@; am__v_MAKEINFO_1 = AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@) am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@) am__v_INFOHTML_0 = @echo " INFOHTML" $@; am__v_INFOHTML_1 = AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@) am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@) am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@; am__v_TEXI2DVI_1 = AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@) am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@) am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@; am__v_TEXI2PDF_1 = AM_V_texinfo = $(am__v_texinfo_@AM_V@) am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@) am__v_texinfo_0 = -q am__v_texinfo_1 = AM_V_texidevnull = $(am__v_texidevnull_@AM_V@) am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@) am__v_texidevnull_0 = > /dev/null am__v_texidevnull_1 = INFO_DEPS = as.info TEXINFO_TEX = $(top_srcdir)/../texinfo.tex am__TEXINFO_TEX_DIR = $(top_srcdir)/.. DVIS = as.dvi PDFS = as.pdf PSS = as.ps HTMLS = as.html TEXINFOS = as.texi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man_MANS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(as_TEXINFOS) $(srcdir)/Makefile.in \ $(top_srcdir)/../mkinstalldirs DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GDBINIT = @GDBINIT@ GENCAT = @GENCAT@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ INCINTL = @INCINTL@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ LD = @LD@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBINTL = @LIBINTL@ LIBINTL_DEP = @LIBINTL_DEP@ LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ NO_WERROR = @NO_WERROR@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OPCODES_LIB = @OPCODES_LIB@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARN_CFLAGS = @WARN_CFLAGS@ WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@ WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@ XGETTEXT = @XGETTEXT@ YACC = @YACC@ YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ atof = @atof@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ cgen_cpu_prefix = @cgen_cpu_prefix@ datadir = @datadir@ datarootdir = @datarootdir@ do_compare = @do_compare@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ extra_objects = @extra_objects@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ install_tooldir = @install_tooldir@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ obj_format = @obj_format@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_cpu_type = @target_cpu_type@ target_os = @target_os@ target_vendor = @target_vendor@ te_file = @te_file@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ zlibdir = @zlibdir@ zlibinc = @zlibinc@ AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign # What version of the manual you want; "all" includes everything CONFIG = all # Options to extract the man page from as.texi MANCONF = -Dman TEXI2POD = perl $(BASEDIR)/etc/texi2pod.pl $(AM_MAKEINFOFLAGS) POD2MAN = pod2man --center="GNU Development Tools" \ --release="binutils-$(VERSION)" --section=1 man_MANS = as.1 info_TEXINFOS = as.texi as_TEXINFOS = asconfig.texi $(CPU_DOCS) AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \ -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \ -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc CPU_DOCS = \ c-aarch64.texi \ c-alpha.texi \ c-arc.texi \ c-arm.texi \ c-avr.texi \ c-bfin.texi \ c-cr16.texi \ c-cris.texi \ c-d10v.texi \ c-epiphany.texi \ c-h8300.texi \ c-hppa.texi \ c-i386.texi \ c-ip2k.texi \ c-lm32.texi \ c-m32c.texi \ c-m32r.texi \ c-m68hc11.texi \ c-m68k.texi \ c-s12z.texi \ c-metag.texi \ c-microblaze.texi \ c-mips.texi \ c-mmix.texi \ c-mt.texi \ c-msp430.texi \ c-nios2.texi \ c-nds32.texi \ c-ns32k.texi \ c-pdp11.texi \ c-pj.texi \ c-ppc.texi \ c-pru.texi \ c-rl78.texi \ c-riscv.texi \ c-rx.texi \ c-s390.texi \ c-score.texi \ c-sh.texi \ c-sparc.texi \ c-tic54x.texi \ c-tic6x.texi \ c-tilegx.texi \ c-tilepro.texi \ c-v850.texi \ c-vax.texi \ c-visium.texi \ c-xgate.texi \ c-xstormy16.texi \ c-xtensa.texi \ c-z80.texi \ c-z8k.texi # This one isn't ready for prime time yet. Not even a little bit. noinst_TEXINFOS = internals.texi MAINTAINERCLEANFILES = asconfig.texi as.info BASEDIR = $(srcdir)/../.. BFDDIR = $(BASEDIR)/bfd all: all-am .SUFFIXES: .SUFFIXES: .dvi .ps $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs as.info: as.texi $(as_TEXINFOS) @echo "NOT REBUILDING $@" NetBSD_DISABLED_as.info: as.texinfo $(as_TEXINFOS) $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \ rm -rf $$backupdir && mkdir $$backupdir && \ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ `test -f 'as.texi' || echo '$(srcdir)/'`as.texi; \ then \ rc=0; \ else \ rc=$$?; \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; exit $$rc as.dvi: as.texi $(as_TEXINFOS) $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \ `test -f 'as.texi' || echo '$(srcdir)/'`as.texi as.pdf: as.texi $(as_TEXINFOS) $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \ `test -f 'as.texi' || echo '$(srcdir)/'`as.texi as.html: as.texi $(as_TEXINFOS) $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp) $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $(@:.html=.htp) `test -f 'as.texi' || echo '$(srcdir)/'`as.texi; \ then \ rm -rf $@ && mv $(@:.html=.htp) $@; \ else \ rm -rf $(@:.html=.htp); exit 1; \ fi .dvi.ps: $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ $(DVIPS) $(AM_V_texinfo) -o $@ $< uninstall-dvi-am: @$(NORMAL_UNINSTALL) @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ rm -f "$(DESTDIR)$(dvidir)/$$f"; \ done uninstall-html-am: @$(NORMAL_UNINSTALL) @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ done uninstall-info-am: @$(PRE_UNINSTALL) @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ else :; fi); \ done uninstall-pdf-am: @$(NORMAL_UNINSTALL) @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ done uninstall-ps-am: @$(NORMAL_UNINSTALL) @list='$(PSS)'; test -n "$(psdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ rm -f "$(DESTDIR)$(psdir)/$$f"; \ done dist-info: $(INFO_DEPS) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for base in $$list; do \ case $$base in \ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$base; then d=.; else d=$(srcdir); fi; \ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ if test -f $$file; then \ relfile=`expr "$$file" : "$$d/\(.*\)"`; \ test -f "$(distdir)/$$relfile" || \ cp -p $$file "$(distdir)/$$relfile"; \ else :; fi; \ done; \ done mostlyclean-aminfo: -rm -rf as.t2d as.t2p clean-aminfo: -test -z "as.dvi as.pdf as.ps as.html" \ || rm -rf as.dvi as.pdf as.ps as.html maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done install-man1: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man1dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.1[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-info check-am: all-am check: check-am all-am: Makefile $(INFO_DEPS) $(MANS) installdirs: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-am clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: $(DVIS) html: html-am html-am: $(HTMLS) info: info-am info-am: $(INFO_DEPS) info-local install-data-am: install-data-local install-info-am install-man install-dvi: install-dvi-am install-dvi-am: $(DVIS) @$(NORMAL_INSTALL) @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \ $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \ done install-exec-am: install-html: install-html-am install-html-am: $(HTMLS) @$(NORMAL_INSTALL) @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ $(am__strip_dir) \ d2=$$d$$p; \ if test -d "$$d2"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \ $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ else \ list2="$$list2 $$d2"; \ fi; \ done; \ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ done; } install-info: install-info-am install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \ $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \ fi; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ if test -f $$ifile; then \ echo "$$ifile"; \ else : ; fi; \ done; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done @$(POST_INSTALL) @if $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: $(PDFS) @$(NORMAL_INSTALL) @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done install-ps: install-ps-am install-ps-am: $(PSS) @$(NORMAL_INSTALL) @list='$(PSS)'; test -n "$(psdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-aminfo \ maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: $(PDFS) ps: ps-am ps-am: $(PSS) uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ uninstall-man uninstall-pdf-am uninstall-ps-am uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-aminfo clean-generic \ clean-libtool cscopelist-am ctags-am dist-info distclean \ distclean-generic distclean-libtool distdir dvi dvi-am html \ html-am info info-am info-local install install-am \ install-data install-data-am install-data-local install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-man1 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-aminfo \ maintainer-clean-generic mostlyclean mostlyclean-aminfo \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am uninstall-dvi-am \ uninstall-html-am uninstall-info-am uninstall-man \ uninstall-man1 uninstall-pdf-am uninstall-ps-am .PRECIOUS: Makefile asconfig.texi: $(CONFIG).texi @echo "NOT REBUILDING $@" NetBSD_DISABLED_asconfig.texi: rm -f asconfig.texi cp $(srcdir)/$(CONFIG).texi ./asconfig.texi chmod u+w ./asconfig.texi # We want install to imply install-info as per GNU standards, despite the # cygnus option. install-data-local: install-info # Maintenance # We need it for the taz target in ../../Makefile.in. info-local: $(MANS) # Build the man page from the texinfo file # The sed command removes the no-adjust Nroff command so that # the man output looks standard. as.1: $(srcdir)/as.texi asconfig.texi $(CPU_DOCS) @echo "NOT REBUILDING $@" NetBSD_DISABLED_as.1: touch $@ -$(TEXI2POD) $(MANCONF) < $(srcdir)/as.texi > as.pod -($(POD2MAN) as.pod | \ sed -e '/^.if n .na/d' > $@.T$$$$ && \ mv -f $@.T$$$$ $@) || \ (rm -f $@.T$$$$ && exit 1) rm -f as.pod # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: